CCG15-24-12S | TDK-Lambda (Dongdianhua Landa) | Isolated DC-DC Power Module, CCG15S Series, Single-Channel Output Through-Hole Insert Module

I. Appearance

Standard 1 × 1 inch metal shielded package, six-sided metal shielded enclosure, PCB straight pin installation

Dimensions: 25.4mm × 25.4mm × 9.9mm

Weight: Approximately 20g

Encapsulation: Metal sealed enclosure, 6-pin straight DIP module, enclosure grounding, strong anti-EMI performance TDK Produc...

2. Core electrical parameters

Input: Nominal 24V, wide voltage 9~36V, compatible with 12V/ 24V system

Output: Single-channel 12V, maximum 1.3A, rated power 15.6W

Efficiency: Typical 88%

Isolation withstand voltage: Input-Output 1500VDC; Input - Enclosure, Output - Enclosure 1000 VDC

Ripple noise: maximum 95 mVp-p

Switching frequency: 430 kHz

Adjustable output: Supports ±10% trim pin voltage adjustment (10.8~13.2V)

Maximum Capacitive Load: 1200μF

III. Protection and Environmental Characteristics

Protection function: built-in overcurrent protection, automatic fault recovery; Supports remote on / off

Operating temperature: -40°C to +85°C, wide temperature range, natural cooling without the need for a fan.

Warranty: 5 years warranty from the factory

Product status: mass production Active, commercial ITE power module, non-automotive grade

IV. Product Advantages

Six-sided full metal shielding, low electromagnetic noise, suitable for industrial noise environment

9~36V ultra-wide input, compatible with battery, 24V industrial bus, simplify power selection

1 inch standard pin, pin-to-pin compatible with other power models in the same series, easy to replace

It operates in a wide temperature range, with reliable low-temperature startup, making it suitable for outdoor and industrial equipment.

Isolation design enables separation between high-voltage and low-voltage sides, enhancing system safety.

V. Typical Application Scenarios

Industrial control boards, industrial control data acquisition modules

Communication equipment and power supply for remote sensors.

24V battery-powered devices, non-automotive-grade in-vehicle non-automotive-grade devices

Test and measurement instruments, medical auxiliary equipment (non-life medical)

ITE Information and Electronic Equipment

For technical and business advice, please contact: 182778968089