SCL3400-D01|Murata Gyroscope|Motion Sensor|Inclinometer|Motion Sensor - Inclinometer ±90° X, Y Axis 40Hz Bandwidth 12-SMD, Flat Lead 

SCL3400-D01-10 Murata motion sensor inclinometer

Motion sensor - inclinometer ±90° X, Y axis 40Hz bandwidth 12-SMD, flat leads

SCL3400-D01-10 is a dual-axis inclinometer produced by Murata Electronics, primarily used for measuring plane angles and supporting SPI interface output. The following are the key parameters:

Core parameters

Measurement range: ±90° (X/Y axis)

Resolution: 0.005° (at 40Hz bandwidth)

Operating voltage: 3.0V~3.6V

Operating temperature: -40°C~85°C

Package: 12-SMD flat lead

Performance characteristics

Ultra-low noise: The noise density is as low as 0.0009°/√Hz, enabling high-precision measurements

Stability: Capacitive 3D-MEMS technology, with misadjustment drift within the temperature range of ≤0.12°

Application scenarios: structural health monitoring, leveling systems, inertial measurement units, etc

Gyroscope | SCA3400-D01 | SCH16T-K10 | SCH16T-K01 SCA3300-D01 | SCL3300-D01 | SCL3400-D01 | SCH1633-D01 SCA3400-D01

SCH16T-K10 

SCH16T-K01 

SCA3300-D01 

SCL3300-D01 

SCL3400-D01 

SCH1633-D01 

Tilt sensor (three-axis acceleration)

SCL3300-D01

For industrial and construction machinery: inertial detection devices, level meters, tilt compensation, mechanical control, structural health monitoring

The measurement mode can be selected from four modes according to the purpose and required value

Ultra-low noise, high resolution 0.001°√SCL3400-D01.png

Murata | Murata Sensors | Filter | Murata Capacitors | Murata Inductors | Murata Beads | Murata Thermistors | For technical and business inquiries regarding Murata agents, please contact Mr. Zhang at 13430464310