News
A high-tech factory specializing in flow meters
The company's instrument science and technology park covers an area of 100,000 square meters
The company's instrument science and technology park covers an area of 100,000 square meters
CUS200M‑24 is an open‑frame medical‑grade AC‑DC switching power supply manufactured by TDK‑Lambda (a subsidiary of TDK).
| Item | Parameters |
|---|---|
| Model | CUS200M‑24 |
| Input Voltage | 85‑265VAC, 47‑63Hz universal AC input |
| Output | 24VDC; Adjustable range: 23.5‑25.2VDC |
| Rated Current | 8.4A |
| Power Rating | 200W with convection cooling; 252W with forced‑air cooling |
| Efficiency | Up to 94% |
| Standby Power Consumption | ＜0.5W |
| Auxiliary Standby Output | 5V/0.6A (1A under forced‑air cooling) |
| Isolation Withstand Voltage | 4000VAC (2MOPP medical isolation) |
| Dimensions | 127 × 76.2 × 34 mm (5×3×1.3inch), open‑frame |
| Weight | Approx. 350g |
| Safety Certifications | IEC60601‑1 Medical (2×MOPP), IEC62368‑1 ITE, CE, TUV |
| Operating Temperature | -20℃ ~ +70℃ (derating required at high temperature) |
| Protection Functions | Over‑Current Protection (OCP), Over‑Voltage Protection (OVP), Over‑Temperature Protection (OTP), Short‑Circuit Protection (SCP), Over‑Power Protection (OPP), Brown‑Out Protection (BOP) |
| Additional Features | Remote On/Off, DC‑OK power good signal, PFC power factor correction |
| Max. Operating Altitude | 4000m for medical applications; 5000m for ITE equipment |
Application Scope
Medical Equipment (Primary Market)
Patient monitors, ECG machines, dental equipment, ultrasound devices, various BF‑class medical instruments; scenarios requiring low leakage current, double isolation and fan‑less silent power supply.
ITE Commercial & Industrial Equipment
1. Broadcasting equipment, professional audio amplifiers (fan‑less silent operation)
2. Laboratory test and measurement instruments
3. Industrial control equipment, complete automation systems, robot supporting power supply
4. Internal power supply for end‑equipment; 3×5‑inch standard footprint for direct drop‑in replacement of legacy power supplies
Others
End‑products requiring internal embedded power supply, fan‑free operation and high reliability.
Notes
1. This is an open‑frame unit. It shall not be used in bare condition and must be enclosed within the end‑system housing.
2. Power derating is required at 70℃ ambient temperature. Full 252W output is only achievable under forced‑air cooling, not convection cooling.
Welcome to consult, let's start to cooperate!
